8 tips to properly use Poultry Feed Pellet Making Machine

Author:Animal Feed Block Making Machine updatetime:2014-06-07 Clicks:12

　　Used for processing particle Poultry Feed Pellet Making Machine is mainly refers to all kinds of feed pellet machine, among them, the ring die pellet machine feed is one of the most commonly used, today to introduce is feed ring die pellet machine general maintenance method.8 tips to properly use Poultry Feed Pellet Making Machine

1, the use of feed particles should be inspected carefully before they are processing machine equipment parts whether screw fastening.
Before

2, start the motor, the first round at the ends of the adjusting screw loosening, observe whether the machine transmission way is consistent with the logo as shown.

3. The moisture of feed raw materials should be around 15%, moisture content is too high or too low will affect the grain yield and quality.

4, feed raw materials should be cleared out of the hard stuff, so as not to damage the machine.
Must stop feeding before

5, stop, wait until the interior material is processed, granulation add oil press material into the template hole, keep the hole is smooth, in order to avoid jams occur next time.

6, roller bearing under the condition of normal production, five days must be clean with gasoline or diesel, at the same time into the lubricating oil, gear maintenance once half a year, vertical shaft bearings cleaning a 7 days.

7, feed grain processing machine if stop using for a long time, the machine must be wipe and clean the whole body, parts of smooth surface coated with anti-rust oil, cloth peng good cover, prevent in a cool, ventilated place.

8, feed particles machine ring die and roller replacement method.After roller wear particles machine, can replace the roller skin or replace complete sets of roller, find bearing looseness, lock, should replace the shaft bearings or joined.Ring die pellet machine ring die after aging, wear and tear, loose hoop chuck, change into new;If the screw type, you must first vibration grinding tool, gently and evenly forcibly removing the screw, can replace the new grinding tool.